Publications

Sakalo V.I., Sakalo A.V. Criteria for predicting the initiation of rolling contact fatigue damage in the railway wheels and rails

Vestnik of the Railway Research Institute. 2019;78(3):141-148. (In Russian)

https://doi.org/10.21780/2223-9731-2019-78-3-141-148

Abstract
The development of the methods for modeling the processes of accumulation of the rolling contact fatigue damage and wear of the wheels of the railway rolling stock and the rails is particularly relevant due to the increase in the number of damage in the recent times. The work is underway to improve the chemical composition and the technology of production of the wheel and rail steels in order to improve their mechanical properties and ability to resist the action of the cyclic loads. The methods of modeling allow predict the possibility of initiation of the fatigue cracks during operation with the sufficient accuracy in the short time. The selection of the contact fatigue criterion and the mathematical apparatus for calculating the stresses at points in the area adjacent to the contact patch to obtain the numerical values of the criterion components is the most important task in the development of modeling methods. The article focuses on the approaches based on the Dang Van criterion and the shakedown diagram for a material undergoing to the action of cyclic loads, which are widely used to assess the rolling contact fatigue of the wheels and rails. The assumptions that are used in the development of the algorithms concerning the models of the contacting bodies, the shape of the contact patch, the distribution of the contact pressures and the tangential forces are considered. The approach using the criterion — the amplitude value of the maximal shear stress is also considered. The example of modeling the process of accumulation of the rolling contact fatigue damage in the wheel of the freight car is given. The results of modeling are presented in the form of the isolines of the criterion values and the accumulated damage in the area adjacent to the contact patch. This work was supported by the Russian Foundation for Basic Research under Grant [17-01-00815A].

 
 
 

Publications

 All publications

Dmitry POGORELOV, Alexander RODIKOV, Roman KOVALEV. PARALLEL COMPUTATIONS AND CO-SIMULATION IN UNIVERSAL MECHANISM SOFTWARE. PART II: EXAMPLES

TRANSPORT PROBLEMS. 2019 Volume 14 Issue 4. DOI: 10.20858/tp.2019.14.4.3

Read more
Pogorelov D., Rodikov A., Kovalev R. Parallel computations and co-simulation in Universal Mechanism software. Part 1: Algorithms and implementation

Transport problems. Volume 14, Issue 3, 2019. DOI: 10.20858/tp.2019.14.3.15

Free full paper

Read more
Sakalo V.I., Sakalo A.V. Criteria for predicting the initiation of rolling contact fatigue damage in the railway wheels and rails

Vestnik of the Railway Research Institute. 2019;78(3):141-148. (In Russian)

https://doi.org/10.21780/2223-9731-2019-78-3-141-148

Read more
V. Sakalo, A. Sakalo, A. Rodikov, S. Tomashevskiy. Computer modeling of processes of wear and accumulation of rolling contact fatigue damage in railway wheels using combined criterion

Wear. Volumes 432–433, August 2019, 102900

Full paper (Available for free till 4/09/2019)

Read more
 
Hongdi Wang, Zigang Deng, Shunshun Ma, Ruixue Sun, Haitao Li, and Jipeng Li. Dynamic Simulation of the HTS Maglev Vehicle-Bridge Coupled System Based on Levitation Force Experiment

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, VOL. 29, NO. 5, AUGUST 2019

Free full paper

Read more
Rang Zhang, Yuanjin Ji, Lihui Ren, Gang Shen. A Straddle Monorail Running Gear with Single-Axle and Rotating Arm Axle Box Suspension

Urban Rail Transit. Published online: 10 October 2017. DOI 10.1007/s40864-017-0067-z

Free full paper

Read more
Pogorelov, D.Yu. INFLUENCE OF DRILLING FLUID ON FREE OSCILLATIONS OF DRILLSTRING

"Oil and Gas business" network edition. 2018. №5. UDC 531.39

Read more
Olshevskiy, A., Kulinichev, N., Olshevskiy, A., Kim, C. W., & Yang, H. I. Efficient three-stage approach to fatigue life assessment for transport machines in the context of stilt sprayer performance

Engineering Failure Analysis. Volume 81, November 2017, Pages 10-30 DOI: https://doi.org/10.1016/j.engfailanal.2017.06.028

Free full paper

Read more
 
V. Sakalo, A. Sakalo, S. Tomashevskiy, D. Kerentcev. Computer modelling of process of accumulation of rolling contact fatigue damage in railway wheels.

International Journal of Fatigue, Volume 111, June 2018, Pages 7–15. https://doi.org/10.1016/j.ijfatigue.2018.02.002

Free full paper (available until March 31, 2018)

Read more
Iman Hazrati Ashtiani. Optimization of secondary suspension of three-piece bogie with bevelled friction wedge geometry

International Journal of Rail Transportation, Published online: 09 Jun 2017 DOI 10.1080/23248378.2017.1336652

Free full paper (for first 50 downloads)

Read more
Gennady Mikheev, Dmitry Pogorelov and Alexander Rodikov. Methods of Simulation of Railway Wheelset Dynamics taking into account Elasticity

First International Conference on Rail Transportation, Chengdu, China, July 10-12, 2017

Free full paper 

Read more
Zhuang QI, Wenlian ZHANG, Pengfei LIU and Qiang LEI. Study on the Dynamics Behaviour and MBS Modeling Method of a Subway Track Detecting Vehicle

First International Conference on Rail Transportation, Chengdu, China, July 10-12, 2017

Free full paper 

Read more
 
Qian XIAO, Chao CHANG, Jifeng ZHENG, Jiao FANG. Prediction of wheel/rail rolling contact wear under the situation of wheel/rail vibration

First International Conference on Rail Transportation, Chengdu, China, July 10-12, 2017

Free full paper 

Read more
Jia Xiaohong. Dynamic Performance of Metro Train Passing Through Turnout Branch in Depot

First International Conference on Rail Transportation, Chengdu, China, July 10-12, 2017

Free full paper 

Read more
Zhihui Chen, Lei Xu, Wanming Zhai. Investigation on the Detrimental Wavelength of Track Irregularity for the Suspended Monorail Vehicle System

First International Conference on Rail Transportation, Chengdu, China, July 10-12, 2017

Free full paper 

Read more
Maksym Spiryagin, Qing Wu & Colin Cole. International benchmarking of longitudinal train dynamics simulators: benchmarking questions

Vehicle System Dynamics, Published online: 11 Jan 2017  DOI: 10.1080/00423114.2016.1270457

Free full paper (for first 50 downloads)

Read more
 
Dmitry Pogorelov et al. Train 3D: the technique for inclusion of three-dimensional models in longitudinal train dynamics and its application in derailment studies and train simulators

Vehicle System Dynamics, Published online: 11 Jan 2017  DOI: 10.1080/00423114.2016.1273532

Free full paper (for first 50 downloads)

Read more
Alexander Olshevskiy, Chang-Wan Kim, Hyun-Ik Yang & Alexey Olshevskiy. Wear simulation for the centre plate arrangement of a freight car

Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility. DOI: 10.1080/00423114.2015.1023319

Read more
Iman Hazrati Ashtiani, Subhash Rakheja and AKW Ahmed. Influence of friction wedge characteristics on lateral response and hunting of freight wagons with three-piece bogies

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 0954409716647095first published on May 3, 2016.  DOI: 10.1177/0954409716647095.

Read more
R. Kovalev, A. Sakalo, V. Yazykov, A. Shamdani, R. Bowey & C. Wakeling (2016): Simulation of longitudinal dynamics of a freight train operating through a car dumper

Vehicle System Dynamics, http://dx.doi.org/10.1080/00423114.2016.1153115

Read more
 
Iman Hazrati Ashtiani, Mehrnoosh Abedi. Effects of Liquid Cargo on Lateral Stability of B-Train Combination

SAE 2014, Commercial Vehicle Engineering Congress, Illinois, US

Read more
Iman Hazrati Ashtiani, A. K. W. Ahmed, Subhash Rakheja, Jimin Zhang. Hunting Characteristics of a Freight Car in Presence of Secondary Suspension Non-Smooth Contact Dynamics

ASME Congress 2014, Montreal, Canada

Read more
Iman Hazrati Ashtiani, Subhash Rakheja, A. K. W. Ahmed, Jimin Zhang. Hunting Analysis of a Partially-Filled Railway Tank Car

Joint Rail Conference 2015, San Jose, CA, US

Read more
Iman Hazrati Ashtiani, Subhash Rakheja, A. K. W. Ahmed. Hunting and Derailment Analysis of a Partially-Filled Railway Tank Car

IHHA 2015, Perth, Australia

Read more
 
Amir Kolaei, Iman Hazrati Ashtiani, Mehrnoosh Abedi, Subhash Rakheja. Applicability of Linear Slosh Theory on Stability of the B-train Combination

IAVSD 2015, Graz, Austria

Read more
D. Pogorelov, O. Dmitrochenko, G. Mikheev, R. Gandikota. Flexible multibody approaches for dynamical simulation of beam structures in drilling.

Proc. of the ASME 2014 10th Int. Conf. on Multibody Systems, Nonlinear Dynamics, and Control, MSNDC2014, August 17-20, 2014, Buffalo, New York, USA. DETC2014-35113.

Read more
D. Pogorelov, G. Mikheev, K. Valiullin, R. Gandikota. Use of multibody system approach for torque and drag analysis of long drill strings.

11th World Congr. on Computat. Mech., July 20-25, 2014, Barcelona, Spain, pp. 688-699.

Read more
O. Dmitrochenko, G. Mikheev, D. Pogorelov, R. Gandikota. A nonlinear finite element for simulation of dynamics of beam structures using multibody system approach.

11th World Congress on  Computational Mechanics (WCCM XI), July 20-25, 2014, Barcelona, Spain, pp. 655-666.

Read more
 
Kovalev R. Optimizing Multibody Systems: Some Implementations and Results. In Werner Schiehlen and Michael Valasek (eds.)

Preprints of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Czech Technical University in Prague, Prague, 2002, pp. 107-112

Read more
Pogorelov D. Multibody System Approach in Simulation of Underwater Cable Dynamics.

Programme and Abstracts. EUROMECH 398, Colloquium on Fluid-Structure Interaction in Ocean Engineering, Technical University Hamburg-Harburg, Hamburg, Germany, October 11-14, 1999.

Read more
Pogorelov D. Differential-algebraic equations in multibody system modeling.

Numerical algorithms, pp. 183-194, 1998.

Read more
Klaus-G. Hinzen and Roman Kovalev. Hiller’s seismoscope.

Seismological Research Letters, Volume 81, Number 5, September/October 2010, P. 804-810.

Read more